User's Manual

12
9300 Mobile Compute
r
Reference Manual
5) Replace the side plate and tighten the screws.
Warning: Make sure the mobile computer is set to Suspend mode; otherwise, it may
cause damage to the mobile computer.
Figure 5: Inserting the SD Card
REMOVING THE SD CARD
If you wish to remove the SD card, simply push the card after removing the side plate.
The SD card will be rejected automatically.
1.3 KEYPAD
Silicon rubber has been chosen for their durability and prompt feedback.
Note: Functionality of keys is application-dependent.
1.3.1 KEYPAD SETTINGS
 Press [FN] first, and then [0].
The LED backlight of keypad is turned off by default. It can be toggled ON/OFF by the
key combination: [FN] + [0]. It is suggested to turn on the keypad backlight while
working in a dark area; however, using backlight while on battery power will
substantially reduce battery power.
 Go to Start > Settings > Control Panel and double-tap the Keyboard icon.
The Character Repeat functionality is enabled by default. You may cancel the check
box to disable it. When enabled, tap, hold, and drag the slider for a desired Repeat
Delay and Repeat Rate.