User's Manual
25
Chapter 1 Using the 9200 Mobile Compute
r
1.5. NOTIFICATIONS
1.5.1. STATUS LED
Two LED indicators located above the touch screen provide information about charging
status, scanner light beam, and scanner "Good Read" during data collection.
LED Indicators
Status Description
Green, solid Charging complete
Red, solid Charging the mobile computer
Charging
Red, solid for 8 sec, then
flashing
Charging error (for instance,
battery not in place)
Left
Scanner decode Green, flash once Good read
Right Scanner beam
Orange, on while scan key
is pressed
Scanner laser beam sent out
Note: For Scanner decode and Scanner beam LED to function, LED notification must be
enabled in Reader Configuration. See Enable LED Notification.
1.5.2. AUDIO
The speaker is used to play sounds for events in Windows and programs, or play audio
files such as .WAV files. In addition, it can be programmed for status feedback. In noisy
environments, you may consider connecting a CTIA headset instead. A headset jack is
provided on the left side of the mobile computer, which is a 3.5 mm DIA stereo earphone
jack. The mobile computer also supports using Bluetooth headsets.
Go to Start Screen | Settings, and tap Sounds & Notifications to configure related
settings.