User's Manual

20
9200 Mobile Compute
r
Reference Manual
1.3.2. ALPHA KEY
This alphanumeric keypad is set to numeric mode by default. The Alpha key [Į] serves as
a switch key between numeric and alpha (lower-case alphabetic) input modes.
Note: Press [Į] key to switch between numeric and lower-case alphabetic modes.
The alpha icon will appear on the status bar with a sequence as shown below.
Status Icon
Alpha Key Input Mode
--- Numbers
Press [Į] one time Lower-case alphabetic characters
Note:
(1) Under mode, use the Shift key [×] to enter ALPHA (upper-case alphabetic)
character (
or ) mode.
(2) If you are using the on-screen keyboard, tap CAP (Caps Lock) to switch
upper-case and lower-case alphabetic modes.
1.3.3. SHIFT KEY
Status Icon Shift Key Input Mode
Ш
Ш
Press [×] one time The Shift key [×] modifies the next key pressed
depending on the input mode.
(1) In numeric mode (
), it will modify the next key
pressed.
(2) In alpha (lower-case alphabetic) mode (
), it will
show a single upper-case character after pressing Shift
key [×] one time.
For example, input “ABC”, it will show “Abc.
Ш
Ш
Press [
×] two times
(enter Shift Lock Mode)
Pressing Shift key [×] two times will lock the present input
mode.
(1) In numeric mode (
), it will lock numeric mode.
(2) In alpha (lower-case alphabetic) mode (
), it will
lock upper-case alphabetic mode (= Caps Lock).
For example, input “ABC”, it will show “ABC”.
Note: It is not necessary to long press the Shift key [×].