User's Manual

9200 Mobile Compute

Reference Manual

USING SNAP-ON CABLE

1. Fasten the Snap-on Charging and Communication Cable to the lower end of the

mobile computer.

2. Insert the adapter DC plug into the power jack on the Snap-on Cable.

3. Connect one end of the power cord to the adaptor, and the other end to an

electrical outlet. (Use power cord suitable for your country.)

The charging LED (left) on the mobile computer lights red while charging. The LED

will turn green when charging is completed.

4. If necessary, connect the USB/RS-232 end of the cable to your PC for data

transmission.

Note: You may connect the Snap-on Cable to your PC for simultaneous data

communication and charging.

9200 LED Indicator

Status Description

Red, solid Charging the mobile computer Charging

Green, solid Charging complete