User's Manual

153
Chapter 8 Using Camera
8.4. CAMERA SETTINGS
On the softkey bar, tap the button to configure camera settings if necessary.
Brightness, Contrast, Sharpness
Adjusts brightness, contrast, and sharpness for the picture to take.
Mode
Sets a scene mode for the picture to take. By default, no special mode is applied.
Options are:
Icon
Description
Backlight
Night mode
Stabilize
Outdoor
Low light
White Balance
Tap to select a specific scenario for setting white balance. By default, the camera is
set to adjust automatically. Options are:
Icon
Description
Bright light
Indoor light
Sunny light
Cloudy light
Effect
Applies a special effect to the picture to take. By default, no special effect is applied.
Options are:
Monochrome, Negative, and Sepia
Timer
Enables the timer which allows taking the picture a period of time after the [Scan]
key or [Enter] is pressed. By default, timer is disabled. Options are:
3 seconds, 5 seconds, and 10 seconds
This is only applicable in Still mode.