User's Manual

95
Chapter 4 Program Manager & Kernel
Options Description
RS232 By selecting RS232 interface, you nee d to configure baud rate settings
both on your PC and the mobile computer.
USB VCOM By sel ecting USB Vi rtual COM for the transmi ssion i nterface, your PC
and the mobile computer shoul d be connected wi th a USB cabl e before
the update can be done.
Bluetooth By sel ecting B luetooth f or the transmi ssion interface, you se lect to
approach a Bluetooth enabled device for kernel update.
SD Card By sel ecting SD card for interface, yo u sel ect to access the SD card
inserted in the mobile computer to carry out kernel update.
USB VCOM_CDC By selecting USB Virtual COM_CDC for the transmission interface, your
PC and the mobi le computer
should be connecte d wi th a USB cabl e
before the kernel update can be done.
T
his o ption is a vailable o nly
when USB Virtual COM_CDC is in use.
Baud Rate
Available baud rate options: 115200/57600/38400/19200/9600 bps
KERNEL UPDATE VIA BLUETOOTH
1) Go to Kernel Menu | 4. System Menu | 7. Bluetooth Menu | 3. Security, an d
configure the following Bluetooth settings first.
 Authentication
 PIN code
2) Go to Kernel Menu | 2. Kernel Update and select Bluetooth.
3) Start t he p airing procedure from your PC, for exampl e, cl ick [Pai r Devi ce] a nd/or
[Connect Bluetooth Serial Port].
4) On y our PC, run the download utility ProgLoad.exe. In [C omm set ting] group box,
make the following settings:
- Select RS-232 for [Comm type], so as to access Bluetooth SPP.
- Configure [COM port] properties according to the Bluetooth COM port created on
your P C. Go to start | Control Panel | System | Hardware | COM & LPT to
check it up.