User's Manual
Table Of Contents
- IMPORTANT NOTICES
 - RELEASE NOTES
 - INTRODUCTION
 - USING MOBILE COMPUTER
 - LEARNING SOFTWARE ARCHITECTURE
 - SYSTEM MENU
 - PROGRAM MANAGER & KERNEL
 - SPECIFICATIONS
 - DOWNLOAD UTILITY
 - TROUBLESHOOTING
- CANNOT TURN ON WHEN PRESSING POWER KEY
 - CHARGING ERROR
 - BUZZER SEEMS NOT WORKING
 - LED INDICATOR SEEMS NOT WORKING
 - LCD TOUCH SCREEN SEEMS NOT WORKING
 - KEYPAD SEEMS NOT WORKING
 - VIBRATOR SEEMS NOT WORKING
 - MOBILE COMPUTER SEEMS NOT WORKING
 - CANNOT SCAN BARCODES
 - CANNOT DECODE DATA AFTER SCANNING
 - CANNOT TRANSMIT/RECEIVE DATA
 
 - KEY REFERENCE TABLES
 
12 
8700 Series Mobile Computer Reference Manual
1.1.2 BACKUP BATTERY 
The backup  battery o n the main  board take s the respo nsibility to s upply po wer to  the 
mobile computer when the main battery is re moved or drained out.  When fully charged, 
the 3.0 V/7 mAh rechargeable Lithium button cell helps retain data in SRAM and maintain 
the r unning of  t he real-time clock and calendar for  at l east 25  days without the mai n 
battery. In the meantime, you ha ve to repl ace the main battery as  soon as possible. It 
takes at  least  t wenty-four h ours t o f ully ch arge t he back up batt ery. How ever, it is n ot 
necessary to fully charge the backup battery for the mobile computer to work. 
  Monitor voltage level by System Menu (see 3.5 Power) 
1.1.3 CAUTION OF LOW BATTERY CHARGE 
The battery pack is the only power source  for the mobile computer to work.  It also 
charges the backup b attery on the main bo ard so the data stored in SRAM can be  
retained properly. Therefore when the main battery charge goes low, you need to replace 
the ba ttery pack  wi th a charged  one or charge it as soon as possible. Most of all, you 
should upload important data on a regular basis. 
Warning:  Data loss may  occur with SRAM durin g low battery condition. Always save 
data before running out of power or keep a fresh battery for replacement. 










