User's Manual

90
8700 Series Mobile Computer Reference Manual
Download to Memory Sector “ACT”:
1. Press the navigation key [Down] to move down to the acti ve memory sector, “ACT”, whi ch
may be unoccupied already. Press [Enter] to select it.
2. Select a desired interface for downloading.
3. Connect the interface cable if required.
4. On your PC, run the utility ProgLoad.exe. Make necessary configuration on its user’s interface,
select the pr ogram to do wnload, and press OK button to proce ed. The mob ile computer will
start to download the assigned program.
If the acti ve memory sector has al ready been occu pied by an a pplication program, the newl y
downloaded program will overwrite the old one and come to activation immediately.
4.1.2 ACTIVATE
Select thi s i tem to acti vate a program on the mobile computer. When this item is
selected, it f irst list s all the spare programs stored on the mobile computer t hat i sn’t
active at the moment.
Select any one from the list (from 1 to 6) or select the SD card. T he selected program
will be copied to the active memory sector and replace the current one.
Note: A font file cannot be activated.
As soon as a program is activated, the mob ile computer shuts down. When you power it
on again, a screen appears sho wing the message <New Program Start>, take t he
following action to keep or clear out the files in the SRAM:
TO CLEAR FILE SYSTEM
Press [ES C] to clean out the files in the S RAM. In this case, no data (transactions,
settings, etc.) is kept on the mobile computer when the new program comes into play.
TO KEEP FILE SYSTEM
To keep the files, simply press any key other than [ESC].