User Manual

Chapter 4 Configuring 8500 71
Figure 16: Downloading through Program Manager
¾ Memory Bank 01 ~ 06
Only application program can be downloaded to these banks.
Empty bank:
 Select an empty bank by pressing the corresponding number and then [Enter].
 Select baud rate for downloading.
 Connect cable and wait connecting…
 To abort the action, press [ESC]. Then press [ESC] again to return to the menu.
Occupied bank:
If no available banks, you'll have to replace one program with the new one.
 Select a program that you want to delete by pressing the corresponding number and then [Enter].
 The program information is displayed on the screen. Press [Alpha] to enter the capital mode. Then
press [C].
 Select baud rate for downloading.
 Connect cable and wait connecting…
 To abort the action, press [ESC]. Then press [ESC] again to return to the menu. From the menu,
you'll find the program is deleted but no new program is present.
If you simply want to delete a program, press [D] in step 2.
Note: [C], [D] are NOT case sensitive.