User Manual

32 Industrial 8500 Reference Manual
¾ Serial Cradle (RS-232)
When the cradle is set up,
1 Connect one end of a RS-232 cable to the RS-232 port on the back of the cradle.
2 Connect the other end of the cable to the RS-232 port of a host computer.
3 See the flow chart for the rest steps.
¾ Modem Cradle
When the cradle is set up,
1 For communications via an internal modem, slide the DIP switch on the back of the
cradle to right.
2 Connect the telephone line to the [Line] jack on the back of the cradle.
3 You may connect the cradle to a telephone through the [Phone] jack.
4 See the flow chart for the rest steps.
2.6.2 Wireless
The terminal is capable of wireless communications via the following technologies:
 IrDA
 Bluetooth
 IEEE 802.11b/g
Refer to 1.3.10 Wireless Support
for more details.