User's Manual
Table Of Contents
- Copyright Notice
- FCC Regulations
- Care & Maintenance
- Getting Started
- Preface
- CHAPTER 1: Introducing CPT-8500
- CHAPTER 2: Installing CPT-8500
- CHAPTER 3: Software Architecture
- CHAPTER 4: Configuring CPT-8500
- CHATPER 5: Managing CPT-8500
- Specifications
- Troubleshooting
- Appendix I - Download Utilities
- Index
52 Industrial CPT-8500 Reference Manual
¾ Bluetooth Menu > Connect Setting
A basic Bluetooth system can be configured as (1) point to point and (2) point to multi-point
(Piconet; up to seven slaves can be connected to a master).
Set the following parameters.
Local Name:
Enter a name for identifying the terminal.
Remote Name:
Enter a name for making specific connection.
The remote name must be one of those in the Freq. Dev. List.
Otherwise, the terminal will fail to make connection with any
device. DO NOT specify any remote name when roaming is
required.
Broadcast Me:
Options - Enable or Disable
For initial connection, broadcasting must be enabled. For
security reason, simply disable it to hide the terminal from
other Bluetooth devices.
Power Saving:
Options - Enable or Disable
This refers to the low power consumption mode. Only the
Sniff mode is supported.