User's Manual

[20] Nordic

[21] Portugal

[22] Russian

[23] Slavic

[24] Polish

[25] Turkish

[26] Slovak(CP1250)

Default: System Font

y Tests

1. Reader

To test the reading performance of the scanner. The following barcodes are default to

enable:

Code 39

Industrial 25

Interleave 25

Codabar

Code 93

Code 128

UPCE

UPCE with ADDON 2

UPCE with ADDON 5

EAN8

EAN8 with ADDON 2

EAN8 with ADDON 5

EAN13

EAN13 with ADDON 2

EAN13 with ADDON 5

Other barcodes must be enabled through programming.

2. Buzzer

To test the buzzer with different Frequency/Duration. Press ENTER key to start and then

press any key to stop the test.

3. LCD & LED

To test LCD display and LED indicator. Press ENTER key to start and then press any key

to stop the test.

4. Keyboard

To test the rubber keys. Press a key and the result will be shown on the LCD display. Note

that the FN key should be used in conjunction with numeral keys.

5. Memory

To test the data memory (SRAM). Note after the test, the contents of the memory space will

be wiped out.

y Memory

1. Size Information

Information includes sizes of the base memory (SRAM), memory card (SRAM) and