User's Manual

3/9 Version 1.1
ඔ
碁
ઝݾٝڶૻֆ׹
No. 10-1 , Li-hsin Road I
Science-based Industrial Park ,
Hsinchu 300,Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Web site: www.wneweb.com
30
D11
5V tol, BiDir, 2mA, 50K Pull Down Host PC Card Data Bus, Bits 11
31
IORD#
5V tol, BiDir, 2mA, 50K Pull Up Host PC Card I/O Space Read Strobe
32
D12
5V tol, BiDir, 2mA, 50K Pull Down Host PC Card Data Bus, Bits 12
33
IOWR#
5V tol, BiDir, 2mA, 50K Pull Up Host PC Card Space I/O Write Strobe
34
D13
5V tol, BiDir, 2mA, 50K Pull Down Host PC Card Data Bus, Bits 13
35
CE1#
5V tol, BiDir, 2mA, 50K Pull Up Host PC Card Select, Low Byte
36
D14
5V tol, BiDir, 2mA, 50K Pull Down Host PC Card Data Bus, Bits 14
37
CE2#
5V tol, BiDir, 2mA, 50K Pull Up Host PC Card Select, High Byte
38
D15
5V tol, BiDir, 2mA, 50K Pull Down Host PC Card Data Bus, Bits 15
39
GND
Ground Digital Ground
40
GND
Ground Digital Ground
41
RESET
5V tol, COMS, ST (Schmitt Trigger)
Input, 50K Pull Up
Hardware Reset,
42
IREQ#
5V tol, BiDir, 2mA, 50K Pull Up
Host PC Card interrupt Request (I/O
Mode), also used as WLAN module
Ready (Memory Mode) output which is
asserted to indicate module initialization
is complete
43
REG#
5V tol, BiDir, 2mA, 50K Pull Up
Host PC Card Attribute Space Select
Memory mode: H for common memory,
L for attribute memory.
The signal must be low during I/O cycles
when the I/O address is on the bus.
44
WA IT#
COMS Output, 4mA, 50K Pull Up Host Wait,
45
RF_LED#
Input, 9mA LED cathode
46
IOIS16#
Pull Low, Output
8 Bits or 16 Bits I/O Card selected
L: 16 bit or odd byte only operation
47
STSCHG#
COMS Output, 4mA 50K Pull Up
Host PC Card Status Change
To show the BVD1 (Battery Voltage
Detect), BVD2, WP (Write Protect), or
Ready status changed.
48
CD1#
Pull Low, Output Card Detect
49
GND
Ground Digital Ground
50
INPACK#
CMOS BiDir, 2mA, 50K Pull Up
Host PC Card I/O Decode Confirmation
It is asserted by the module when it is
selected and responding to an I/O read