User's Manual

69
Chapter 3 System Menu
1) For initial association with an access point, you will see an antenna icon developing
on the screen to indicate that the Terminal is processing a pre-share key.
2) After having generated the pre-share key, the Terminal proceeds to establish a
connection with an access point, and you will see the whole antenna is flashing.
3) When the Terminal has been connected to the access point successfully, you will see
the whole antenna and the indication of wireless signal strength.
Note: If you are programming in C or BASIC, be aware that the antenna icon will appear
on the device screen after NetInit() or START TCPIP() is called. (WPA must be
enabled first!)
The changing icon indicates
8200 is processing a pre-share key.
Wait for a few seconds.
The antenna icon will become ready and
flashes to indicate 8200 is connecting
to an access point under the same SSID.
Once connected, the antenna icon will
stop flashing. Next to the icon, the
more bars, the stronger the signal.