User's Manual

37
Chapter 3 System Menu
3.2.3 CONTRAST
Set the contrast level for the LCD.
 Press the arrow keys [Up] and [Down] to adjust the contrast level.
3.2.4 AUTO OFF
The Terminal will be turned off automatically when no operation is taking place during a
specified period of time. Enter a value between 0 and 999 (minute).
Note: To disable this function, enter 0.
3.2.5 POWER ON (& WAKEUP EVENT) OPTIONS
Set the startup screen once the Terminal is turned on, and specify which events will wake
up the Terminal:
Power On Options
Press the arrow keys [Up] and [Down] to select “Program Resume” or “Program Restart”, and then
press [ENTER].
 Program Resume: When selected, the Terminal will start from the last session of program
before it is turned off.
 Program Restart: When selected, the Terminal will start from the first session of the program.
WakeUp Events
The specified events can wake up the Terminal when the conditions are met. Press the arrow keys
[Up] and [Down] to select a specific event, and press [ENTER] to determine when it is treated as a
wake-up event or not.
 PwrKey: If yes, it will wake up the Terminal upon pressing the Power key.
 USB: If yes, it will wake up the Terminal upon connecting the USB cable.
 Charged: If yes, it will wake up the Terminal upon completion of charging.
 Alarm: If yes, it will wake up the Terminal upon the alarm time is up. Alarm can be set up
through programming only.