User's Manual

8200 Series Mobile Computer Reference Manual

GETTING STARTED

INSERTING BATTERY & MEMORY CARD

For shipping and storage purposes, save the Terminal and the main battery in separate

packages. This will keep both batteries in good condition for future use.

Note: Any improper handling may reduce the battery life.

1) Hold the Terminal still and slide the release latch to the right to unlock the battery

cover.

2) Slide off the battery cover.

3) Use your finger to slide the locking plate towards its hinge to unlock the SD card

holder.

4) Flip up the SD card holder.

5) Insert your memory card (microSD or microSDHC) to the SD card holder.

6) Push the SD card holder down.

7) Slide the locking plate away from its hinge to secure the card.

8) Slide the battery pack into the battery compartment at a proper angle (30°~45°) so

that the metal contacts of the battery are met with the charging contacts inside the

compartment. Make sure that the battery is snugly fit into the compartment.

9) Replace the battery cover.

10) Slide the release latch to the left to lock it firmly.

Note: For a new battery, make sure it is fully charged before use. Always prepare a

spare battery pack, especially when you are on the road.