User Manual

34
8000 Series Mobile Computer Reference Manual
3.3.6 ECHO TEST
After a physical connection is established properly, run the utility “Echo Test” on your
computer and start this test on your mobile computer. Select a desired baud rate. To
stop and exit the test, press [ESC].
IR (Cradle-IR)
This echo test is to verify connectivity via IR between the mobile computer and any cradle.
MODEM
This echo test is to verify connectivity via modem. A telephone line must be connected to the
Modem Cradle.
Note: For the Modem Cradle, any value other than 57600 bps (default) must be
configured through the DIP switch on the IR control board.