User's Manual

69
Configuring 5000/5100:
Kernel Menu
4.5.3 Kernel Update
The Kernel might be changed for improving performance or other reasons, and an
update is necessary.
1. Connect cable.
2. Set communication parameters at PC end: 115200, none, 8, 1.
3. Enter Kernel Menu> Kernel Update.
The system is ready to update the Kernel firmware.
Only RS-232 interface is allowed.
4.5.4 Test & Calibrate
These tools are provided for manufacturing use. No user definition is allowed.
z
Burn-In Test
z
Calibrate RTC
Warning! This is NOT for the use of any end users.