User's Manual

64
Configuring 5000/5100:
Program Manager
4.4.2 Activate
Screen 21: Program Manager> 2. Activate
The list shows the entire spare programs stored in the terminal. From the list, you can
select from 01 to 06 and activate one of them.
z
When an application program is activated, it will be copied to the active memory
and replace the old one.
The <New Program Start> screen instructs that “Press [ESC] to clear file”. It
means the file system in the SRAM will be cleared out when pressing [ESC]. Then
there will be no data (transactions, settings, etc.) stored in the terminal when the
new program comes into effect. To keep the data, simply press any other key.
z
When a font file is activated, it will replace the system font. The active application
program will remain intact.