User's Manual

Installing 5000/5100:

Wiring

2.2 Wiring

This section gives instructions on how to wire the terminal to external devices, a host,

or another terminal.

RS-232 (JP3)

Connect to a host computer

RS-485 (JP3)

Connect to another terminal

Digital inputs (JP3)

Connect to external devices like an actuator (button) to

open door

Digital outputs (JP2)

Connect to external devices like door lock, siren, etc.

Table 9: Types of interfaces

To ease installation and maintenance, most of the wirings (except for the Ethernet)

are through JP2 and JP3. These connectors are detachable terminal blocks. That

means, soldering is not required and these terminal blocks can be separated from the

main PCB easily.

Figure 18: Terminal blocks