User Manual

134
Enter Setup
1560 Series Barcode Scanner User Guide
5.3 PREFIX/SUFFIX CODE
By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured
to be suffix code. Up to 8 characters can be configured, for example, “Barcode_”, and
you will have the string appear in front of the barcode read, like this –
“Barcode_1234567890”.
 If “BT HID”, “USB HID” or “Keyboard Wedge” is configured for interface, Key Type
and Key Status
will then become applicable. You may decide whether or not to apply
Key Status when “Normal Key” is selected for Key Type. Refer to Keyboard Wedge
Table.
Key Type
Key Status
Scan Code Up to 4 scan code values are allowed. N/A
Normal Key Up to 8 character strings are allowed.
 Default setting
 Add Shift
 Add Left Ctrl
 Add Left Alt
 Add Right Ctrl
 Add Right Alt
 Add Break
For example, read labels for [Add Shift],
[A], [Add Shift], and [B].
1) Read the label above to apply prefix code or suffix code separately, and follow steps
2~3. (Max. 8 characters each)
2) Read the “Hexadecimal Value
” label on page 188 for the desired character string. For
example, read “2” and “B” for the scanner to prefix or suffix the character [+].
3) Read the “Validate” label to complete this setting.
Configure Prefix
C
onfigure Suffix