User Manual

23
Update
Chapter 1 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。
1.4 BEEPER
The scanner has a buzzer to provide user feedback in various operating conditions.
Beeping
Meaning
One long beep, high tone Power on, with red LED on (1 s) and off quickly
two short beeps, high tone Power off, with green LED on and off quickly, and finally
red LED on
One short beep, high tone
(programmable, default to 4 KHz)
Good Read, with green LED on and off quickly
Six short beeps, high-low tone
repeats three times
 Enter Configuration Mode, with red LED flashing
 Exit Configuration Mode
Two short beeps, low-high tone Setup label read successfully
One short beep, high tone More setup label required
One long beep, low tone
 Transmit Buffer Full, with red LED on and off quickly
 Configuration Error (Wrong label…)
Two short beeps, high-low tone
 Data saved to Transmit Buffer (out of range)
 Memory Mode – Memory Full, with red LED on and off
quickly
Two long beeps, high-low tone Multi-Barcode Mode – Buffer Full
Three short beeps, tone ascending
from low to high
 WPAN connection established, with blue LED flashing
 WPAN connection resumed, with blue LED flashing
Three short beeps, tone ascending
from high to low
WPAN connection out of range or suspended