User Manual

172
Enter Setup
1660 Barcode Scanner
User Guide
ENTERING PIN CODE FOR A WPAN CONNECTION
By default, the PIN code is set to “0000”. Maximum 16 characters are allowed.
Note: When using BT HID, some device driver may not support pre-defined PIN code for
authentication. In this case, make sure you disable authentication before pairing.
The host PIN code will be displayed on the computer screen. Have the scanner
read the setup barcode “Enter PIN Code in Decimal” to input the matching PIN
code quickly.
1) Read one of the labels above to specify the PIN code, in decimal or hexadecimal.
2) Read the “Decimal Value
” label on page 169 or the “Hexadecimal Value” label on page
170 for the desired digits or character string.
3) Read the “Validate” label to complete this setting.
Enter PIN Code in Hexadecimal …
Enter PIN Code in Decimal …
Clear PIN Code