User Manual

6
Enter Setup
1660 Barcode Scanner
User Guide
Working Mode
Upon powering up, the 1660 scanner will try to establish a connection with 3610 or a computer
with Bluetooth
®
wireless technology. Refer to Chapter 3 – Setting up a WPAN Connection for
details. The connection between the scanners and 3610 is made easy and reliable.
Note: If USB Virtual COM or BT SPP is selected for output interface, the host can directly
send serial commands to configure the scanner. For example, run
HyperTerminal.exe and type the 6-digit command located under each setup label.
Refer to Appendix II Host Serial Commands
.