User Manual

157
Update
Appendix I 錯誤! 使用 [常用] 索引標籤將 Heading 1 套用到您想要在此處顯示的文字。
USING A GENERIC DONGLE
1) Refer to 3.2.3 Connect to Dongle for the target scanner to accept the connection
request from your computer.
2) Read the following labels in sequence to configure the scanner to use BT SPP as
output interface.
3) Read the following labels in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
4) Run the download utility “ProLoad.exe” or “Download.exe” on your computer.
(Download.exe requires version 2.3 or later!)
Open the firmware update “*.shx”, and select the correct COM port.
5) The scanner will automatically restart itself when upgrading firmware is completed
successfully.
E
nter Setup
Activate BT SPP
(and read labels for PIN code …)
U
pdate
E
nter Setup
D
ownload