User's Manual

Enter Setup

2564MR Barcode Scanner User Guide

1.11 AUTO-SENSE MODE

Auto-sense is only available when the scanner is working in Laser Mode. The scanner will be

expecting barcodes as long as it is seated in the Auto-sense stand. Whenever a barcode is

brought within range, the scanner will be able to decode it.

To stop this mode, just remove the scanner from the stand.

*Enable

Disable

For your convenience, the scanner is designed to power on automatically in Auto-sense

mode when you seat it in the stand connecting to the power socket. By default, this

mechanism is disabled. You have to enable it by having the scanner read the Enable

barcode below.

Enable

*Disable

1.12 NEGATIVE BARCODES

Normally, barcodes are printed with the color of the bars darker than that of the spaces. But

for negative barcodes, they are printed in the opposite sense just like negative films. The

spaces of negative barcodes are printed with a color darker than that of the bars. You can

configure the scanner to be able to read negative barcodes in the following symbologies: