User's Manual

18
Enter Setup
2564MR Barcode Scanner User Guide
Steps Action User Feedback if Successful
1 Power on the scanner...
T
he scanner will respond with a long beep
(high tone) and its LED indicator will
become solid red and go off quickly.
2 Enter the Configuration Mode…
T
he scanner will respond with six beeps
(high-low tone repeats three times), and its
LED indicator will become flashing red.
3 Read a Setup barcode...
For example,
T
he scanner will respond with one short
beep if reading a special setup barcode such
as “Prefix Code”, indicating the setup
requires reading more barcodes.
When “BT HID”, “USB HID” or
“
Keyboard
Wedge” is configured for interface, Key
T
ype and Key Status will then become
applicable. You may decide whether or not
to change key status when “Normal Key” is
selected for Key Type.
 Refer to Appendix III
Read the “Hexadecimal Value” barcodes for
the desired character string. For example,
read “2” and “B” for the scanner to prefix
the character “+”.
 Refer to Appendix IV “Hexadecimal
System”
The scanner will respond with two beeps
(low-high tone) when the input values are
validated.
4 Exit the Configuration Mode…
OR
Same as for Enter the Configuration Mode.
5 The scanner will automatically restart itself… Same as for Power on the scanner.
LIST THE CURRENT SETTINGS
Special setup
barcodes
Hexadecimal
barcodes