User's Manual

257
Update
Appendix II Host Serial Commands
Purpose To use variable Virtual COM port when connecting more than one cradle to PC via USB.
Here is the setup barcode for this serial command:
Version<CR>
Purpose To get the firmware versions.
Here is the setup barcode for this serial command:
GetID<CR>
Purpose To get MAC ID.
Here is the setup barcode for this serial command:
Download<CR>
Purpose To download CPU firmware to the cradle via RS-232 or USB.
Here is the setup barcode for this serial command:
EXAMPLE
Without using the scanner to read the above setup barcodes for configuring the cradle, you
may run HyperTerminal.exe on the host computer to send serial commands to the cradle via
RS-232 or USB.
UseVariablePort
Version
GetID
Download