User's Manual

248
Enter Setup
2564MR Barcode Scanner User Guide
Enter Setup
Activate Cradle
USB Virtual COM
Update
5) Read the following barcodes in sequence for the cradle to enter the download mode. The
Communication LED on the cradle will be flashing red to indicate it is ready for
downloading.
Enter Setup
Download Cradle
CPU Firmware
6) Run the download utility “ProgLoad.exe” on your computer.
Kernel Program User Program
2560CradleKV*.shx 2560CradleUV*.shx
 For the communication settings, select
“RS-232” and the correct COM port for
RS-232 or USB Virtual COM interface.
 For RS-232, select 115200 bps for baud rate;
for USB Virtual COM, ignore the baud rate
setting.
 For the file option, click [Browse] to select the
target file for firmware update.
 Click [OK].
7) The cradle will automatically restart itself when upgrading firmware is completed
successfully.
8) Read the “Update” barcode for the scanner to resume its operation (exit the
configuration mode).