User's Manual

Enter Setup

2564MR Barcode Scanner User Guide

Working Mode

Upon powering up, the scanner will try to establish a connection with the BT cradle or a computer with

Bluetooth

wireless technology. Refer to Chapter 3 – Setting up a WPAN Connection for details. The

connection between the scanners and the cradle is made easy and reliable.

Note: If RS-232, USB Virtual COM or BT SPP is selected for output interface, the host can

directly send serial commands to configure the scanner. For example, run

HyperTerminal.exe and type the 6-digit command located under each setup barcode.

Refer to Appendix II Host Serial Commands