User's Manual

168
Enter Setup
2564MR Barcode Scanner User Guide
*Disable
FIELD SEPARATOR
Decide whether to apply a field separator (to convert the GS control character to human
readable character). The field separator is automatically added to the data when GS1
formatting is enabled.
Specify Field
Separator…
1) Read the barcode above to specify field separator.
2) Read the “Hexadecimal Value
” barcode on page 264 for the desired character string.
3) Read the “Validate” barcode to complete this setting.
APPLICATION ID MARK
You may want to add an application ID mark (1 character long) to the left (AIMark1) or right
(AIMark2) of an application ID (AI) for the purpose of labeling it when formatting the GS1
data.
AIMark1
AIMark2
1) Read the barcode above to add a mark to the left (AIMark1)/right (AIMark2) of an
application ID.
2) Read the “Hexadecimal Value
” barcode on page 264 for the desired character. Read '00'
if you want to remove the AI mark.
3) Read the “Validate” barcode to complete this setting.