User manual

14
Enter Setup
2564 Barcode Scanner User Guide
The example below shows how to save settings as “User Default” to restore user defaults
later:
Steps
Action
Scanner Feedback if Successful
1
Power on the scanner…
The scanner will respond with a long beep
(high tone) and its LED indicator will
become solid red and go off quickly.
2
Enter the Configuration Mode…
The scanner will respond with six beeps
(high-low tone repeats three times), and
its LED indicator will be flashing red.
3
Read a Setup barcode…
For example,
The scanner will respond with two beeps
(low-high tone) if reading a normal setup
barcode.
4
Exit the Configuration Mode…
OR
Same as for Enter the Configuration Mode.
5
The scanner will automatically restart itself…
Same as for Power on the scanner.
*
When any configuration error occurs...
The scanner will respond with one long
beep (low tone).