User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
71
RFID Reader can be configured to send data to a host computer wirelessly via the
Bluetooth
®
and 3610. Upon powering up, RFID Reader will be ready to establish a WPAN
connection.
To establish a connection via Bluetooth
®
dongle after pairing…
Interface Option Reference
Bluetooth
®
HID 2.5 Bluetooth® HID
Bluetooth
®
SPP (Slave/Master) 2.3 Bluetooth® SPP Slave, 2.4 Bluetooth®
SPP Master
To establish a connection via 3610 after finishing relative configurations…
Interface Option Reference
USB VCOM and HID via 3610 2.6 USB VCOM and HID via 3610
IN THIS CHAPTER
3.1 Connecting via Bluetooth
®
Dongle ................................ 72
3.2 Connecting via 3610 .................................................. 89
3.3 Disconnection............................................................ 92
Chapter 3
SETTING UP A WPAN CONNECTION