User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
48
1800 Series Handheld RFID Reader Reference Manual
2.1 USB INTERFACE
Create a connection between RFID Reader and host computer; you have to select the
available USB interface type by the “#@usb_type=” command. You can also use the
function keys to switch between the USB interface types, refer to
1.3.1.2 Functions.
Command:
#@usb_type?\r
Purpose Get USB Interface Type
Response OK,[m]\r (Default m=‘127’)
[m]: USB Type
‘127’ – Virtual COM CDC
‘128’ – Virtual COM (Silicon Lab driver)
ERR,[code]\r
#@usb_type=[m]\r
Purpose Set USB Interface
Response OK\r
ERR,[code]\r