User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
35
Chapter 1
Understandin
g
RFID Reader
1.3.2 BLUETOOTH
®
PAIRING MODE
For Bluetooth
®
connection requiring PIN code input, you can use Function key and
<Trigger> combination to input numeric codes.
Various numeric input will show you different LED status illustrated below:
No.1~5 No.6~0
PIN CODE Input for Bluetooth
®
Pairing:
Number Input
Key Operation LEDs Status
Number 1 <Trigger> once <F2> →
Number 2 <Trigger> twice <F2> →
Number 3 <Trigger> three times <F2> →
Number 4 <Trigger> four times <F2> →
Number 5 <Trigger> five times <F2> →
Number 6 <F1+Trigger> once <F2> →
Number 7 <F1+Trigger> twice <F2>→
Number 8 <F1+Trigger> three times <F2> →
Number 9 <F1+Trigger> four times <F2> →
Number 0 <F1+Trigger> five times <F2> →
Send PIN Code <F2>+<Trigger>
Erase the PIN Code <F1>+<F2>
Cancel the Pairing <F1>+<F2>+<Trigger>