User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
32
1800 Series Handheld RFID Reader Reference Manual
1.3.1 RFID MODE
1.3.1.1 FUNCTION KEY FOR POWER OFF
Press <F1>+<F2> keys for 3 seconds with two short beeps, high tone and then release
both keys to power off the RFID Reader.
1.3.1.2 FUNCTIONS
Note: Press <F1>+<F2> to switch between Group1, Group2 or Group3. The 3 groups of
function key commands are only available in RFID mode. In Alternate mode, the
function keys are only used for keypad output strings.