User's Manual

24
1800 Series Handheld RFID Reader Reference Manual
Warning: Using Bluetooth
®
connection will substantially reduce battery power.
Disable the Bluetooth
®
function when it is not in use.
1.2 MEMORY
 Memory Mode
4MB flash for Memory Mode data access.
 Transmit Buffer Memory
2KB buffer while getting out of range over a wireless personal area network (WPAN)
The RFID reader has 2 modes online through Bluetooth
®
, or memory mode where scans
are stored and transmitted at a later stage through USB.
1.2.1 TRANSMIT BUFFER
By default, transmit buffer is enabled and used when the RFID Reader is out of range.
Upon reading a tag successfully within range, the RFID Reader responds with one short
beep (high tone) and LED3 indicator becomes solid green and goes off. When the reader
gets out of range, the transmit buffer is used to stored scanned tags until the buffer is
full or until its back within range.
When transmit buffer is enabled…
If the RFID Reader is out of range, it will respond with two short beeps, high-low tone, upon
reading a tag successfully.
When transmit buffer is full, the RFID Reader will respond with one long beep (low tone). You are
advised to get back within range.
When transmit buffer is disabled…
If the RFID Reader is out of range, it will respond with one long beep (low tone). You are advised
to get back within range.