User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
9
Quick Start
2) Use a terminal emulation program, e.g. HyperTerminal, to confirm the connection
between host computer and RFID Reader. Open the HyperTerminal on the host
computer.
3) Enter a name and choose an icon for the connection. Click “OK” to continue.
4) According to the information of Step 1, select the proper connected COM port, e.g.
COM3.