User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
142
1800 Series Handheld RFID Reader Reference Manual
5.3 PREFIX/SUFFIX CODE
Prefix/Suffix codes can be utilized for applications like data section prompt string,
separating string, carriage return or other auxiliary data-identification. Each data section
has its own individual prefix/suffix codes up to 8 bytes.
Prefix/Suffix Index
For a prefix or suffix index, you have to specify for which section (e.g. Data Counter, Time
Stamp or EPC Tag Data) you want to apply it to.
Command:
#@dat_pfxidx?\r
Purpose Get Prefix/Suffix Buffer Index
Response OK,[m]\r
[m]: Prefix / Suffix Index
[m] Description
‘1’ Prefix of Data Counter Section
‘2’ Suffix of Data Counter Section
‘3’ Prefix of Time Stamp Section
‘4’ Suffix of time Stamp Section
‘5’ Prefix of EPC Tag Data Section
‘6’ Suffix of EPC Tag Data Section
ERR,[code]\r
#@dat_pfxidx=[m]\r
Purpose Specify Prefix/Suffix Buffer Index
Response OK\r
ERR,[code]\r