User's Manual

135
Chapter 5 DefinING Output Format
Year
For year output field, you can define it as 2 digits or 4 digits.
Command:
#@dat_tyear?\r
Purpose Get the Setting of Year Field
Response OK,[m]\r (Default m= ‘0’.)
[m]: Year format. 0 – 2 digits, 1 – 4 digits (shown as ‘20xx’).
ERR,[code]\r
#@dat_tyear=[m]\r
Purpose Set the Year Field
Response OK\r
[m]: Year format. m= ‘0’ is for 2 digits, m= ‘1’ is for 4 digits (shown as ‘20xx’).
ERR,[code]\r
Example:
Command
#@dat_tyear? → default format for year is 2 digits
Response (s)
OK,0
3. 12-04-12 05:44 59.47 30003430333130303132303030304221
Command
#@dat_tyear=1 → set year format to 4 digits
Response (s)
OK
4. 2012-04-12 05:44 59.47 30003430333130303132303030304221