User's Manual

77
Chapter 3 Set Up a WPAN Connection
6) Wait for a few seconds for the Wizard to search available devices nearby.
All available devices will appear on the search window. Select the device (e.g. RFID Reader) that
you want to connect.
If the target device does not appear on the list, click [Search Again] to refresh the list. The RFID
Reader might enter power-saving mode during an idling time (=discoverable), and you can
press the <Trigger> to have it active again. It will then stay active for a specified period of time
(2 minutes by default) and wait for the host computer to establish a connection.
7) See SPP Slave connection below, click [Next].