User's Manual

1800 Series Handheld RFID Reader Reference Manual

Command:

#@bt_secure?\r

Purpose Get Bluetooth

Authentication

Response OK,[m]\r (Default m= ‘0’)

[m]: Authentication

‘0’ – Disable

‘1’ – Enable

ERR,[code]\r

#@bt_secure=[m]\r

Purpose Set Bluetooth

Authentication

Response OK\r

ERR,[code]\r

PIN CODE

RFID Reader allows up to 16 characters for a PIN code. If the PIN or passkey is incorrect, any

connection requirement will be rejected by RFID Reader. See step 8 in 3.1.3 Bluetooth®

HID and SPP

Slave. By default, the PIN code value is “0000”.

Command:

#@bt_pin?\r

Purpose Get Bluetooth® PIN Code

Response OK,[m],[n]\r (Default m= ‘0000’, n= ‘4’)

[m]: length of PIN ‘0’ ~ ‘16’, ‘0’ means no PIN

[n]: PIN, 1~16 characters, only exists when [m]!= ‘0’ (m≠0)

ERR,[code]\r

#@bt_pin=[m],[n]\r

Purpose Set Bluetooth

PIN Code

Response OK\r

ERR,[code]\r

Use random PIN

No PIN required