User's Manual

72
1800 Series Handheld RFID Reader Reference Manual
3.1 CONNECTING VIA BLUETOOTH
®
DONGLE
3.1.1 CHANGE INTERFACE
Once the USB connection between host computer and RFID Reader is successfully, you
have to change the connected interface type before establishing a WPAN connection via
Bluetooth
®
dongle.
In the HyperTerminal window, issue “#@bt_type=” command to change the connected
interface and issue “#@bt_type?” command to confirm the used interface at present.
 “Activate Bluetooth
®
HID”, the parameter is ‘5’.
 “Activate Bluetooth
®
SPP Slave Mode”, the parameter is ‘0’.
 “Activate Bluetooth
®
SPP Master Mode”, the parameter is ‘3’.
For example, if you want to use SPP Slave for a connection type, see below: