User's Manual

1.00
Initial Release
0.76 Jun. 29, 2012 Modify: Modify default value of command indicating beep to disable
Modify: Modify default value of EPC tag type to “SGTIN96”
0.75 Jun. 26, 2012
Modify: The sequences of Introduce and Quick Start
Delete: Reader switcher – wrong switcher confgiuration related
information
Delete: USB charging & communication about “charging” wording
Modify: 186xconfiguration about HyperTerminal descriptions
Modify: 1.1.3 Remove bt_ps related command and descriptions to BT
chapter
Modify: 1.1.4 Low Battery Alarm: modify batter voltage value with
persent specified.
Delete: 1.2 Memory – “flash” wording
Delete: 1.2.1 Bluttooth connection
Modify: 1.2.3 Memory Mode – clear memory
Modify: 1.3 Function Key action and PIN code form
Modify: 1.4.1 Normal mode – LED form : LED5-Memory status
Modify: 1.4.2 Temporary mode – Note descriptions
Modify: chapter 2 and 2.2 topic
Modify: Remove 3.1 USB Connection to Quick Start
Modify: Remove 3.4.3 Restore to default to Quick Start
Add: 4.2 descriptions to output data format
Remove: 4.3 illustrations
Remove: 4.3 Press “Space” key (character) to clear the inputted data
description
Modify: 4.3.2 RFID power on to UHF Power on and default value=0
Modify: 4.4 Descriptions to Prefix/Suffix Code and delete example 3
Modify: Remove 4.6 Alternate Mode to Chapter 6
Modify: 5.1 Multi-Tag description
Delete: 5.2.1 “operation time will not be refreshed when a new timeout
is configured.” description.
Delete: 5.3 RFID Host Mode
Modify: 5.3 selected / eliminated to included/excluded
Modify: 5.3 Length Max. value to 256
Remove 5.4.3 EPC Encoding Scheme to 5.4.1
Add: 2.3.4 and 2.6.4 Inter-Function Delay, 2.3.5 and 2.6.5 HID
Character Transmit Mode
0.70 Jun. 12, 2012
Draft Version
0.60 May. 25, 2012
Draft Version
0.55 May. 10, 2012
Draft Version
0.50 Apr. 20, 2012
Draft Version