User's Manual

65
Chapter 2 Communication Interface
Options Parameter Description
Normal (Default) ‘0’ Depends on the [Shift] key or [Shift Lock] setting
Lower Row ‘1’ For QWERTY or QWERTZ keyboard
Upper Row ‘2’ For AZERTY keyboard
Note: This setting is to be used with the Character Substitution setting when support to
certain keyboard types (languages) is unavailable but required.
CAPITAL LOCK SETTING
In order to send the alphabets with correct case, RFID Reader needs to know the status of Caps Lock
on the keyboard. Incorrect settings may result in reversed case of the alphabets being transmitted.
Status Options Parameter Description
Capital Lock OFF
(Default)
‘0’ Assuming that the status of Caps Lock on the keyboard is OFF,
transmitted characters are exactly the same as in the tag (when
"case-sensitive" is selected for Alphabets Transmission).
Capital Lock ON ‘1’ Assuming that the status of Caps Lock on the keyboard is ON,
transmitted characters are exactly the same as in the tag (when
"case-sensitive" is selected for Alphabets Transmission).
 Refer to the Capital Lock Type above.
Auto Detection ‘2’ RFID Reader will automatically detect the status of Caps Lock on
the keyboard before data is transmitted; transmitted characters
are exactly the same as in the tag (when "case-sensitive" is
selected for Alphabets Transmission).
ALPHABETS TRANSMISSION
By default, the alphabets transmission is case-sensitive, meaning that the alphabets will be
transmitted according to their original case, the status of Caps Lock on the keyboard, as well as the
Capital Lock setting. Select [Ignore Case] to have alphabets transmitted according to the status of
Caps Lock on the keyboard only.