User's Manual

53
Chapter 2 Communication Interface
Options Parameter Description
Normal (Default) ‘0’ Depend on the [Shift] key or [Shift Lock] setting.
Lower Row ‘1’ For QWERTY or QWERTZ keyboard.
Upper Row ‘2’ For AZERTY keyboard.
Note: This setting is to be used with the Character Substitution setting when support to
certain keyboard types (languages) is unavailable but required.
CAPITAL LOCK SETTING
In order to send the alphabets with correct case, the RFID Reader needs to know the status of Caps
Lock on the keyboard. Incorrect settings may result in reversed case of the alphabets being
transmitted.
Options Parameter Description
Capital Lock OFF
(Default)
‘0’ Assuming that the status of Caps Lock on the keyboard is OFF,
transmitted characters are exactly the same as in the tag
(when "case-sensitive" is selected for Alphabets
Transmission).
Capital Lock ON ‘1’ Assuming that the status of Caps Lock on the keyboard is ON,
transmitted characters are exactly the same as in the tag
(when "case-sensitive" is selected for Alphabets
Transmission).
 Refer to the Capital Lock Type above.
Auto Detection ‘2’ The RFID Reader will automatically detect the status of Caps
Lock on the keyboard before data is transmitted; transmitted
characters are exactly the same as in the tag (when
"case-sensitive" is selected for Alphabets Transmission).
ALPHABETS TRANSMISSION
By default, the alphabets transmission is case-sensitive, meaning that the alphabets will be
transmitted according to their original case, the status of Caps Lock on the keyboard, as well as the
Capital Lock setting. Select [Ignore Case] to have alphabets transmitted according to the status of
Caps Lock on the keyboard only.