User's Manual

1800 Series Handheld RFID Reader Reference Manual

#@sys_cmdbp=[m]\r

Purpose Set Command indicating Beep

Response OK\r

ERR,[code]\r

GOOD READ

You have to enable the buzzer beeping function when you want to get a feedback from RFID Reader.

Command:

#@sys_grdbp?\r

Purpose Get Status of Good-Read Beep

Response OK,[m]\r (Default m= ‘1’)

[m]: ‘0’ – Disable

‘1’ – Enable

ERR,[code]\r

#@sys_grdbp=[m]\r

Purpose Set Status of Good-Read Beep

Response OK\r

ERR,[code]\r

FREQUENCY

By default, the frequency for a buzzer is configured to 4KHz. This function is upon Good-Read beep is

enabled.

Command:

#@sys_grdbf?\r

Purpose Get Beeper Frequency

Response

OK,[m]\r (Default m= ‘1’)

[m]: Frequency

‘0’ 8 kHz

‘1’ 4 kHz

‘2’ 2 kHz

‘3’ 1 kHz

ERR,[code]\r

#@sys_grdbf=[m]\r

Purpose Set Beeper Frequency

Response OK\r