User's Manual

1800 Series Handheld RFID Reader Reference Manual

Poor Very good

 Free Memory Size (Green LED)

Empty Full

Note: Press <F1> to switch to Bluetooth

Strength showing upon a Bluetooth

connection

successfully.

Group2 (White LED1):

Press <F1>+<F2> to switch to Group2 with White LED1. The Group2 is defined to 2

commands (Command1 and 2). Press <F2> to switch between Command1 and Command2

or press <F1> to execute the command directly. The LED status will return to normal mode

when you idle about 3 seconds during configuration.

 Command1: Set Single or Multi-Tag Scan Mode.

 Command2: Clear repeated tag list for Multi-Tag Scan Mode.

Press <F2> to switch between Command 1 and 2

Command1 Command2

Executing:

Function

Key Operation LEDs Status

Command1 <F1>+<F2> <F→ 1: Executing>

Command2 <F1>+<F2> <F2>→ <→ F1: Executing>

Group3 (Yellow LED1):

Press <F1>+<F2> to switch to Group3 with Yellow LED1. The Group3 is defined to 4

commands. Press <F2> to switch among the Commands or press <F1> to execute the

command. The LED status will return to normal mode when you idle about 3 seconds during

configuration.

 Command1: Enter/Exit memory mode.

 Command2: Clear data memory.

 Command3: Select USB virtual COM driver (CDC or Silicon).