User's Manual

Chapter 1

Understanding RFID Reader

Note: Press <F1>+<F2> to switch Group1, Group2 or Group3. The 3 Groups function key

commands are only available upon RFID mode. In the Alternate mode, the function

keys are only used for keypad output strings.

Group1 (Green LED1):

Press <F1>+<F2> to enter Group1 with Green LED1. In the Group1, you can press <F1>

to switch among Battery Status, Bluetooth

Signal Quality and Data Memory Space. After

idling 3-seconds timeout, the LED status will return to normal mode.

 Power Level (Red LED)

Exhaustion Low Battery Full Battery

 Bluetooth

Strength (RSSI) (Blue LED)