User's Manual

1800 Series Handheld RFID Reader Reference Manual

READER SWITCHER

RFID Reader supports a switcher that is used to switch between RFID Reader and Alternate

trigger scan. Switch to right for RFID and left for Alternate trigger.

Make sure the reader switcher is set to correct location based on RFID or Alternate mode.

For more Alternate mode information, please refer to Alternate Mode.

COMBINING WITH A TERMINAL

If you wish to combine with a terminal, you have to remove the mounting plate cover and

install the mobile computer mount, follow these steps to remove the mounting plate cover:

1) Place the RFID Reader erectly on a flat and clean surface.

2) Slide the mounting plate cover latch to unlock position.